Welcome to the Maas SCAL interpretation page
Steady State Experiment
This page is based on the original EPT SCAL Interpretation web pages

The simulations are carried out with DuMuX
User name Password
ExperimentSteady State Project name
E-mail address

To help you in getting your first experiment simulated, we have supplied all fields with data. Make sure that you adapt ALL to describe YOUR experiment.
Number of grid blocks in simulator Core orientation Leverett J option
Core length Core diameter
Porosity(Fraction) Permeability
Initial water sat(Fraction)
Relative permeability and capillary pressure Tables
Sw, krwSw, kroSw, Pc (or J function)
Saturations and kr values are fractions. The pressure unit is not used if Leverett-J is "on".
Make sure that Scw and Sor are consistent accross the Tables!
Fluid Data

Oil density Water density
Oil viscosity Water viscosity
Interfacial tension
(Only used if Leverett J option is chosen)
Flow rate (total) End of experiment
Fractional flow Time Table
Specify time t (and unit) since start of experiment and water flow fraction fw (between 0 and 1)
t, fwTime unit
Simulator Control Data

Start time step Max time step
Max change in saturation FractionMax time step increment Factor

Click here to start the calculation: Remember that you will use the results at your own risk!

Clear all entry fields: .

RESET to get DEMO data: Clear all entries to DEMO values. BEWARE: your latest data for Steady State will be lost!

We appreciate your feedback.

©Jos Maas 2011
BY ACCESSING THIS SITE OR BY USING THE PROGRAM(S) ON IT YOU ACCEPT AND WILL BE BOUND BY THE LEGAL TERMS AND CONDITIONS TO THE EXCLUSION OF ANY OTHER TERMS AND CONDITIONS.